TXT
묘사:
Headed Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat fillister
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
Between 0.020 inches and 0.030 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.090 inches and 0.094 inches
Under Head Length:
Between 0.845 inches and 0.865 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
Between 0.035 inches and 0.040 inches
Second Hole Diameter:
Between 0.035 inches and 0.040 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.073 inches and 0.078 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
0.830 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
55.0 rockwell c
Pin Chamfer Angle:
Between 40.0 degrees and 50.0 degrees
Pin Head Diameter:
Between 0.170 inches and 0.180 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches outside diameter
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches all other surfaces
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.095 inches and 0.105 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5630 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight
