TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Slotted
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.188 inches and 0.189 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.600 inches and 0.606 inches
Undercut Diameter:
Between 0.173 inches and 0.175 inches
Under Head Length:
0.662 inches
Undercut Width:
Between 0.027 inches and 0.031 inches
First End Slot Width:
Between 0.027 inches and 0.037 inches
First End Slot Depth:
Between 0.050 inches and 0.055 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
48.0 rockwell c and 52.0 rockwell c
Pin Head Diameter:
Between 0.236 inches and 0.244 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.018 inches and 0.022 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
B50t1133a, 99207 mfr ref single material response
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Cu-ni-in per f50t19h, 99207 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
