부품 정보
Plus twelve each alternating undercuts and shoulders of 0.188 and 0.250diameters respectively, distances frombeginning of eleventh diameter from largest bearing surface of head to the end of the twenty-second diameter are 5.422, 5.953, 6.156, 6.688, 7.172, 7.734, 7.938, 8.484, 8.703, 9.203, 9.641, and 9.859
TXT
묘사:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.875 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
10.734 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee chamfer
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
0.375 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.281 inches
Distance From Centerline To Flat:
0.172 inches
First Diameter From Head:
0.250 inches
Second Diameter From Head:
0.188 inches
Third Diameter From Head:
0.250 inches
Fourth Diameter From Head:
0.188 inches
Fifth Diameter From Head:
0.250 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
0.484 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
1.188 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
1.391 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
2.094 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
2.484 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.ABQJ
Point Style:
Flat
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.250 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
11
Distance From Largest Bearing Surface Of Head To End Of Sixth Diameter:
3.281 inches
Sixth Diameter From Head:
0.188 inches
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
