MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
2.99 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
4.12 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
2.89 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.08 inches
MRC:
The number of holes in a bolt circle.ADPM
Bolt Circle Hole Quantity:
4
First Recess Inside Height:
0.26 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.06 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.050 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
Indicates the type of cut on the corner/s/.CKWB
Corner Cut Type:
Round
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item is supplied with 4 cadmium plated steel captive pan-head 8-32 unc-2ax.62 long screws. Cadmium plating per qq-p-416, type 1, class 3. Item is also supplied with 4 an935-8 steel lock washers and 4 an960d8 alum. Alloy washers.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 3003
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/2 federal specification single material response
