부품 정보
Offset height: 0.390 in. ; this item has been determined to be a critical application item. In-flight failure of this item would create a hazardous condition
TXT
묘사:
Remote Control Lever
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.094 inches and 0.096 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.500 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.690 inches
MRC:
A measurement of the longest dimension of a keyway,in distinction from width.AFYS
Keyway Length:
0.690 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Plain straight
Center To Center Distance Between Link And Shaft Holes:
0.700 inches
Shaft End Thickness:
0.690 inches
Link End Thickness:
0.300 inches
Link End Hole Diameter:
0.193 inches
Distance Between Fork Inside Spread:
0.098 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The means by which the shaft is secured.CZLP
Shaft Securing Method:
Keyway
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Na1-1067, alloy 356-t6, cage 76823 mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis link end, securing hol (s) shaft end
