부품 정보
Groove not anodized
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 1.580 inches and 1.586 inches
Outer Groove Depth:
Between 0.0875 inches and 0.0890 inches
Outer Groove Width:
Between 0.245 inches and 0.255 inches
Flanged Body Outside Diameter:
Between 1.738 inches and 1.739 inches
Inner Groove Depth:
0.121 inches
MRC:
A measurement taken at right angles to the length of the inner groove,in distinction from thickness.ADWA
Inner Groove Width:
Between 0.304 inches and 0.314 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 1.375 inches and 1.376 inches
Peripheral Diameter:
Between 1.795 inches and 1.800 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/9, t73 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize internal
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type 3, cl 1 military specification single treatment response internal
