TXT
묘사:
Nonmetallic Special Shaped Secti
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Bumper strip
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
55.0 shore durometer a and 69.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
2000 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 250.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.380 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.600 inches
Left Side Top Flange Thickness:
0.060 inches
Right Side Top Flange Thickness:
0.060 inches
Left Side Top Flange Width:
0.900 inches
Right Side Top Flange Width:
0.650 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Fuel resistant and oil resistant and weather resistant
First Slot/groove Depth:
0.180 inches
First Offset Height:
0.060 inches
First Slot/groove Width:
0.800 inches
Second Slot/groove Depth:
0.060 inches
Second Slot/groove Width:
0.550 inches
Right Side Offset To End Distance:
0.750 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
