부품 정보
Grease fitting hole drilled 3.250 in. Deep on longitudinal center
TXT
묘사:
Headless Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered and countersunk
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
10.5 millimeters
Second Hole Diameter:
4.8 millimeters
Distance From Centerline Of Hole To End Of Pin:
Between 0.600 inches and 0.640 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
Between 3.310 inches and 4.270 inches
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
Between 6.980 inches and 7.000 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 2.0110 inches and 2.0150 inches
First End Taper Length:
Between 0.170 inches and 0.210 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
Between 0.170 inches and 0.210 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
Second End Countersink Angle:
60.0 degrees
First End Taper Angle:
30.0 degrees
Second End Taper Angle:
30.0 degrees
Second End Countersink Diameter:
Between 0.960 inches and 1.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1045
