부품 정보
Two slots in bore 180 degrees apart, 0.062 in.Radius by 0.250 in.Wide, 1.156 in.Id o/a
MRC:
The included angle of the countersink,expressed in degrees.AATA
Countersink Angle In Deg:
45.0
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 1.874 inches and 1.875 inches
MRC:
The length of the enlarged portion/s/ located on the shank of the item.AAVK
Shoulder Length:
0.750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.062 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.375 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.9990 inches and 1.0000 inches
Major Diameter Length:
0.312 inches
MRC:
The length of a straight line which passes through the center of the countersink,and terminates at the circumference.AYRZ
Countersink Diameter:
1.375 inches
MRC:
An indication of whether or not a bore countersink is included.BQDC
Bore Countersink:
Included
MRC:
Indicates the location of the countersink on the item.BQDD
Countersink Location:
Bb end
MRC:
An indication of whether or not a bore counterbore is included.BQSF
Bore Counterbore:
Not included
Aa End Diameter:
1.625 inches
Bb End Shank Diameter:
1.719 inches
Bb End Chamfer Angle In Deg:
45.0
Aa End Chamfer Length:
0.062 inches
Aa End Chamfer Angle In Deg:
45.0
Shoulder First Fillet Radius:
0.031 inches
Shoulder Second Fillet Radius:
0.125 inches
Fillet Step Radius:
0.015 inches
Length From Aa End To Largest Diameter Face:
2.562 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Iron, qq-i-652/3/class 30
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron, qq-i-652/3/class 30
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain-stepped shoulder
