부품 정보
Rod connection hole countersunk 30 degrees by 0.160 in.Deep
TXT
묘사:
Rod End Connector
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand rod connection
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.980 inches rod connection
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
Between 0.240 inches and 0.260 inches
MRC:
A measurement taken at right angles to the length of a tongue,in distinction from thickness.AHHE
Tongue Width:
Between 0.490 inches and 0.510 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
Between 0.185 inches and 0.193 inches
Shoulder Length:
Between 1.240 inches and 1.260 inches
MRC:
The length of a straight line which passes through the center of a rod connection bore,and terminates at the circumference.AKYC
Rod Connection Bore Diameter:
0.213 inches
MRC:
The distance measured along a straight line parallel to the longitudinal axis which establishes the acceptable depth of the rod connection bore.AKYG
Rod Connection Bore Depth:
1.105 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane of a body.AZTN
Bodydiameter:
Between 0.490 inches and 0.510 inches
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
Between 1.560 inches and 1.580 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches rod connection
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1118
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-633-canceled federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf rod connection