부품 정보
Pitch diameter: 0.333 in.
TXT
묘사:
Rigid Shaft Coupling
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.1240 inches and 0.1250 inches
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.2910 inches first end and 0.2950 inches first end
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.2910 inches and 0.2950 inches first end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.3873 inches both ends and 0.3964 inches both ends
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.3873 inches and 0.3964 inches both ends
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
8 first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined first end
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.000 first end
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.730 inches first end
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute first end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
2
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Steel comp 4340
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard 1st material response or aisi/sae 4340 assn standard 2nd material response
