TXT
묘사:
Remote Control Lever
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Between 0.650 inches and 0.656 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.000 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
19
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 0.562 inches and 0.565 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Splined
Center To Center Distance Between Link And Shaft Holes:
5.070 inches
Shaft End Thickness:
0.700 inches
Link End Thickness:
0.700 inches
Link End Hole Diameter:
Between 0.189 inches and 0.190 inches
Distance Between Fork Inside Spread:
Between 0.437 inches and 0.443 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-367, comp 2014, t6 federal specification single material response
