TXT
묘사:
Compression Helical Spring
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.452 inches
Spring Free Length:
0.650 inches
MRC:
The length of a straight line which passes through the center of the accommodated rod,and terminates at the circumference.AHQJ
Accommodated Rod Diameter:
0.358 inches
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 8.325 pounds and 10.175 pounds
Spring Solid Length:
0.250 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
25.000 pounds per inch
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
0.281 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Must be ground square within 3 degrees maximum of axis; bearing surface of ground ends to be 3/4 to 7/8 of circumference and no overlapping permitted from grinding on outside or inside dia
