부품 정보
Passivate per mil-s-5002; heat treat 175/155 ksi per mil-h-6875; item is a double seat valve; 1st end seat has diameter of 0.250 in.; 1st end diameter 0.375 in.; 2nd end tip diameter meter 0.091 in.; 2nd end seat angle 30 deg; 2nd end under-flange height-0.482 in.; 2nd end flange seat to disk end height 1.690 in.; 2nd end seat inside diameter 0.190 in.; 2nd end seat outside dia0.281 in.; 2nd end diameter 0.310 in.
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.090 inches
MRC:
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.AAZU
Tip Diameter:
0.091 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.190 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-16c/d block40/60 aircraft common
Flange Seat To Disk End Height:
1.540 inches
Under Flange Height:
0.632 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643, comp 630, 17-4ph assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Poppet
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Valve assembly engine electronic control shutoff-fuel, p/n2831158
