부품 정보
30 gal. Capacity receiver tank, tank, pumps, motors and starters mtd on angle iron framework
TXT
묘사:
Heating- Condensate Pumping Unit
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
46.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
42.187 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
18.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
A narrative description of the type of inlet connection.ACQW
Inlet Connection Type:
Internal
MRC:
The industrial designation or term used to define the nominal diameter of the pipe the inlet will accommodate.ACRT
Inlet Pipe Size Accommodated:
2.000 inches
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.0 hertz
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Starter, magnetic, hand-off-automatic, type 2, 3-way strainer valve 2
MRC:
Indicates the type of unit.APQB
Unit Type:
Duplex
MRC:
The measured discharge pressure capacity for which the item is rated,expressed in pounds per square inch.ASHE
Err Default:
Err default
MRC:
The measured discharge pressure capacity for which the item is rated,expressed in pounds per square inch.ASHE
Discharge Pressure Capacity In Pounds Per Square Inch:
130.0
MRC:
The measured amount of water the item can pump,expressed in gallons per minute.ASHF
Err Default:
Err default
MRC:
The measured amount of water the item can pump,expressed in gallons per minute.ASHF
Water Capacity In Gallons Per Minute:
4.0
MRC:
The designation or term used to define the nominal diameter of the pipe the discharge will accommodate.ASHH
Err Default:
Err default
MRC:
The designation or term used to define the nominal diameter of the pipe the discharge will accommodate.ASHH
Discharge Pipe Size Accommodated:
1.250 inches
MRC:
Indicates the type of discharge connection.ASHJ
Discharge Connection Type:
Internal
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
2.000
MRC:
The speed of the electric motor,expressed in revolutions per minute.ASHL
Electric Motor Rpm:
1750.0
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
220.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
