부품 정보
Direction of rotation of input shaft to increase count; drive: one ccw revolution of input shaft equals a count increase of 10; background of tape dull black color 37038 per fed-std-595; material and finish: frame aluminum alloy black anodized, shafts and transfer gearing stainless steel; ball bearings on all shafts; lubrication: ge-f50 versilube in ball bearings; torque 0.5 in. Oz. Max. To start counter at any position or drive counter at any speed less than 600 rpm within temp range of -55 degrees c to +125 degrees c; counter intended for use in an instrument which is wedge lighted white per mil-l-27160; end play 0.003 maximum input shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 3.906 inches and 3.931 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
0.124 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
0.230 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
Between 0.641 inches and 0.671 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6605-01-183-2220 hsi, b-1b acft
MRC:
The number of register(s) contained in the item.ANQD
Register Quantity:
2
MRC:
A measurement from the bottom to the top of the figure.ANQT
Figure Height:
0.187 inches all registers all tiers
MRC:
The mathematical function the register/s/ is designed to perform.AXED
Register Function:
Add all registers all tiers and subtract all registers all tiers
MRC:
Indicates the location of the actuating device on the item.AXEG
Actuating Device Location:
Left side all registers all tiers
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
Slot
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Base all registers all tiers
MRC:
The means by which the display of the numeral is provided.CSWS
Numeral Display Method:
Drum
MRC:
The readout of the numerals displayed by the item.CSWT
Numeral Readout:
000 all registers all tiers and 359 all registers all tiers
MRC:
The direction the shaft turns as viewed from the drive end and the maximum speed,expressed in revolutions per minute.CSWW
Shaft Rotation Direction And Maximum Speed In Rpm:
600.0 clockwise all registers all tiers and 600.0 counterclockwise all registers all tiers
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
White, federal standard 595, 37875 all registers all tiers figure
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Unenclosed cylindrical
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Manufacturers name: counter, course; tape angle counter
