TXT
묘사:
Protection Bellows
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 0.020 inches and 0.060 inches
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
4.880 inches
MRC:
A measurement of the longest dimension of an item when it is in a contracted /compressed/ position,in distinction from width.ATEN
Contracted Length:
1.250 inches
MRC:
A numeric value that reflects the durometer scale hardness rating of a nonmetallic item.BMJT
Durometer Hardness Rating:
40.0
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the inside circumference.CDDD
Small End Inside Diameter:
Between 3.620 inches and 3.750 inches
MRC:
An inside measurement taken at right angles to the length of the large end,in distinction from thickness.CPYJ
Large End Inside Width:
Between 3.180 inches and 3.300 inches
MRC:
A measurement of the longest inside dimension of the large end,in distinction from width.CPYM
Large End Inside Length:
Between 3.620 inches and 3.800 inches
MRC:
An outside measurement taken at right angles to the length of the large end,in distinction from thickness.CPYP
Large End Outside Width:
Between 3.200 inches and 3.360 inches
MRC:
An outside measurement taken at right angles to the length of the small end,in distinction from thickness.CPYQ
Err Default:
Err default and err default
MRC:
An outside measurement taken at right angles to the length of the small end,in distinction from thickness.CPYQ
Small End Outside Width:
Between 3.640 inches and 3.810 inches
MRC:
A measurement of the longest outside dimension of the large end,in distinction from width.CPYS
Large End Outside Length:
Between 3.640 inches and 3.860 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-std-417, type s, class sc, grade 420 military standard single material response
