부품 번호:
2621-926-03item27aclj1-2in
부품 정보
Undercut 0.249 in. Nom diameter 0.047 in. Min 0.078 in. Maximum wide located next to bearing surface of first step
TXT
묘사:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Double chamfer
Under Head Length:
1.406 inches
First Step Diameter:
Between 0.360 inches and 0.390 inches
First Step Length:
0.052 inches
Second Step Diameter:
Between 0.308 inches and 0.310 inches
Second Step Length:
Between 1.329 inches and 1.359 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.062 inches and 0.078 inches
Distance From Centerline Of Hole To End Of Pin:
0.657 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Lw/s: ssbn mk-118 fire control sys; arleigh burke class ddg; emory s. Land class as; forrestal class cv; supply class aoe; seawolf class ssn; wasp class lhd; los angeles class ssn (688); ticonderoga class cg (47)
First End Taper Length:
0.035 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
Between 0.735 inches and 0.765 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.110 inches and 0.140 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-c-320 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
