MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.625 inches and 0.630 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.500 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
Between 0.625 inches and 0.645 inches
MRC:
The length of a straight line which passes through the center of a rod connection bore,and terminates at the circumference.AKYC
Rod Connection Bore Diameter:
Between 1.000 inches and 1.030 inches
MRC:
The distance measured along a straight line parallel to the longitudinal axis which establishes the acceptable depth of the rod connection bore.AKYG
Rod Connection Bore Depth:
Between 0.400 inches and 0.440 inches
Distance From Pivot Pinhole Center To Rod Connection End:
3.000 inches
Fork Arm Thickness:
0.420 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.900 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm 47 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
