MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.150 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
2.000 inches
Second Leg Width:
4.000 inches
Second Leg Corner Radius:
0.120 inches
First Leg Hole Diameter:
Between 0.190 inches and 0.250 inches
Second Leg Hole Diameter:
Between 0.140 inches and 0.180 inches
Second Leg Distance Between Lower Hole Centers Along Width:
3.000 inches
Second Leg Distance Between Hole Centers Along Length:
0.650 inches
Second Leg Distance Between First And Second Hole Centers Along Width:
1.500 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.500 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.550 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.125 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.125 inches
First Leg Width:
4.000 inches
First Leg Corner Radius:
0.120 inches
First Leg Distance Between Upper Hole Centers Along Width:
3.000 inches
First Leg Distance Between Hole Centers Along Length:
0.500 inches
First Leg Distance Between First And Second Hole Centers Along Width:
1.500 inches
First Leg Distance From Edge To Hole Center Along Width:
0.500 inches
First Leg Distance From Edge To Hole Center Along Length:
0.300 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Three holes
First Leg Angle:
150.0 degrees
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
