부품 정보
Lever, cam follower
TXT
묘사:
Remote Control Lever
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.000 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.438 inches and 0.439 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.059 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Nssn class submarine; subatmosphere control
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Plain straight
Center To Center Distance Between Link And Shaft Holes:
1.375 inches
Shaft End Thickness:
1.059 inches
Link End Thickness:
0.310 inches
Link End Hole Diameter:
Between 0.1900 inches and 0.1905 inches
MRC:
The means by which the shaft is secured.CZLP
Shaft Securing Method:
Threaded hole
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Nha main condenser overpressure trip mechanism; center of bore 1.00 in from stepped down end .75 in wide and approx .50-.60 in thk; 1 x .125 diameter pilot through both sides of bore and 1 x .190-24 unc-2b /bore
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-390, uns alloy c86500 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
One hole tongue link end, securing hole shaft end
