부품 번호 2532308

Plate Spacer

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 41.56 and 56.106 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
2532308
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
011931728

부품 정보
Ithere are two holes on the end that are drilled 0.203 inch-with minus 0.02 inch; and plus of 0.05 inch through and the bolt hole slare located 0.250 inches from end and 0.187 inches from side; also 1.750 inches plus and minus 0.005 inches from center to center of bolt holes; the corner on the sides are 0.062 inches by 45 degrees plus and minus 5 degrees; there are two screw holes located 0.625 inches from ends to center of screw holes, the screw holes center is located 0.454 inches from sides and 1.000 inches between screw hole center; the holes are drilled 0.250-20unc-3b through 0.203 and csk 90 degrees plus 10 degrees to a diameter of 0.328 inches with variation of plus of 0.015 inches and a minus 0.005 inches

NSN
국가 주식 번호:
5365-01-193-1728 5365011931728
TXT
묘사:
Plate Spacer
INC
INC
아이템 이름 코드:
26979
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.250 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.906 inches and 0.910 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular

{lang[cimilar]} Plate Spacers

« Bushings, Rings, Shims and Spacers {lang[catalog]}
지금 비교»
맑다 | 숨기다