TXT
묘사:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.752 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 1.020 inches and 1.030 inches
Spring Free Length:
Between 2.484 inches and 2.578 inches
MRC:
The length of a straight line which passes through the center of the accommodated rod,and terminates at the circumference.AHQJ
Accommodated Rod Diameter:
0.719 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
11
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 40.375 pounds and 44.625 pounds
Spring Solid Length:
1.328 inches
Spring Solid Outside Diameter:
Between 0.993 inches and 1.007 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
49.500 pounds per inch
Spring Free Outside Diameter:
Between 0.993 inches and 1.007 inches
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
1.672 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 6150
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624-canceled federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
