TXT
묘사:
Recipro Surface Grinding Machine
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The length of a straight line which passes through the center of a spindle,and terminates at the circumference.AHDQ
Spindle Diameter:
1.250 inches
MRC:
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.AKYN
Furnished Items And Quantity:
No. 24-820 adapter 1, no. 24-697 adapter 1, no. 25-857 lamp attachment 1, permanent magnet 5 by 10 chuck 1, no. 24-955 unihead 1, no. 24-974 cup wheel 1, no. 24-973 dish wheel 1, no. 24-807 straight wheel 1, no. 24-808 straight wheel 1
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
0.5
MRC:
The source of power which drives the item.ATJK
Power Source:
Electric motor
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Floor
MRC:
The maximum length of a straight line which passes through the center of the wheel,and terminates at the circumference.BNBW
Wheel Maximum Diameter:
10.000 inches
MRC:
The position of the spindle on the item.BPSG
Spindle Position:
Horizontal
MRC:
A measurement of the longest dimension of a work surface,in distinction from width.BPSK
Work Surface Length:
13.000 inches
MRC:
A measurement taken at right angles to the length of a work surface,in distinction from thickness.BPSM
Work Surface Width:
5.750 inches
MRC:
The longitudinal distance the work surface will travel.BPSP
Work Surface Longitudinal Travel:
13.500 inches
MRC:
The distance the work surface will extend from one side to the other.BPSQ
Work Surface Cross Travel:
7.000 inches
MRC:
The means by which materials are fed to the work surface.BPST
Work Surface Feed Method:
Hand
MRC:
The measured distance the head can be adjusted vertically.BPSX
Head Vertical Adjustment:
15.000 inches
MRC:
Indicates the type of head feed provided.BPSZ
Head Feed Type:
Hand
MRC:
The maximum distance from the center or end of the spindle to the top of the work surface.BPTB
Maximum Distance From Spindle Center/end To Work Surface Top:
16.500 inches
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0 and 460.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
Acdc, akyn, amps, ancy, elec, faaz and feat