TXT
묘사:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.505 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E1 spring end, ground both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Spring end, ground both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.668 inches
Spring Free Length:
1.794 inches
MRC:
The length of a straight line which passes through the center of the accommodated rod,and terminates at the circumference.AHQJ
Accommodated Rod Diameter:
0.440 inches
MRC:
A numeric value that reflects the hardness of the material when used in conjunction with a hardness rating scale.ALME
Material Hardness Rating:
Between 45.0 rockwell c and 50.0 rockwell c
MRC:
The number of coils included on the item.APCN
Coil Quantity:
8
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 18.000 pounds and 20.000 pounds
Spring Solid Length:
0.600 inches
Spring Solid Outside Diameter:
0.659 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
21.400 pounds per inch
Spring Free Outside Diameter:
0.659 inches
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
0.906 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Copper and tin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
