부품 번호 235-11-64

Gasket

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 0.7 and 0.945 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
235-11-64
비무장화:
No
수명:
N/A
측정 단위:
No qup EA
NIIN:
008979750

부품 정보
Aperture incl two 0.406 in. Inside inverted radius w/0.188 in. Inside corner radius for 2 bolt holes located 4.490 in. Min, 5.510 in. Maximum center to center distance between bolt holes along length, one inside inverted radius for one bolt hole w/30 degrees inside corner radius located 3.052 in. Min, 3.062 in. Maximum opposite side of along length, also inside corner bevel 0.500 in. Nom along width, 0.785 in. Nom along length same side; incl outside corner bevel 0.688 in.Non along width, 1.125 in. Non along length on same side and oppositeon same side and opposite on sam side o/a dim of width reduced 1.443 in. Nom of the length

NSN
국가 주식 번호:
5330-00-897-9750 5330008979750
TXT
묘사:
Gasket
INC
INC
아이템 이름 코드:
04522
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.380 inches and 0.400 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 7.016 inches and 7.031 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 5.381 inches and 5.396 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 4.448 inches and 4.458 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 6.140 inches and 6.155 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.062 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
60.0 shore durometer a and 70.0 shore durometer a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr

{lang[cimilar]} Gaskets

« Packing and Gasket Materials {lang[catalog]}
지금 비교»
맑다 | 숨기다