측정 단위:
* special requirements. EA
부품 정보
Threaded portion of securing hole 1.0 in. Porm .010 deep
TXT
묘사:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
4.2970 inches first end and 4.3000 inches first end
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
4.2970 inches second end and 4.3000 inches second end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
4.9985 inches first end and 5.0000 inches first end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
4.9985 inches second end and 5.0000 inches second end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.1875 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
15.3125 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
10 first end
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
10 second end
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
5/8-11 thd size both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined second end
MRC:
Indicates the design type of the item.APGF
Design Type:
Internal gear
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
5.6875 inches second end
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
6.031 inches first end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole second end
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
1 both ends
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Both ends: located 2.0 in. From small end 1/2 in. Diameter through to major bore dia
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Exposed coupling bolt type and floating shaft
