MRC:
A measurement of the longest dimension of the terminal,in distinction from width.AAEY
Terminal Length:
0.152 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.AAJT
Overall Height:
0.338 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.AAJW
Overall Diameter:
0.125 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the largest circumference.AALA
Largest Diameter:
0.040 inches single end
MRC:
The feature consisting of sleeves,covering,caps,mounting bushings and the like,used to electrically insulate an item.AALV
Electrical Insulation Feature:
Uninsulated
MRC:
The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.AALX
Mounting Method Style:
Swage
Minor Bushing Length:
0.165 inches
Swage Depth:
0.062 inches
Swage Outside Diameter:
0.090 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Nontubular, round
MRC:
Indicates the type of connector or conductor accommodation included on the item.CSFJ
Conductor Accommodation Type:
Pin single end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-626, 1/2h federal specification single material response
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
outer surfaces silver
MRC:
An indication of the precious material contained in the item,and the amount per a measurement scale.PMWT
Precious Material And Weight:
0.040 silver grains, troy
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Silver
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Silver single layer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-s-365 federal specification single treatment response single layer
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
13499-306-0972-00 through 306-0975-00 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
