부품 정보
Hole for 1/8 in. Pipe thd lubrication fitting on shaft end; connection end type, first end: hub; connection end type, second end: shaft
TXT
묘사:
Vehicular Universal Joint
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
Err-070
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Err-070
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Err-070
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
1.257 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.938 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
6
MRC:
Indicates the type of bearings furnished.ACSK
Bearing Type:
Plain
MRC:
The number of holes provided for securing the item in a fixed position.AHYF
Securing Hole Quantity:
2
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
2.625 inches
MRC:
The length of a straight line which passes through the center of an unthreaded securing hole,and terminates on the inside circumference.AMBG
Unthreaded Securing Hole Diameter:
Err-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-090
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
3.750 inches
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Included
MRC:
An indication of whether or not a hub securing hole is included.BTBM
Hub Securing Hole:
Included
MRC:
Indicates the location of the securing hole on the item.BTBN
Securing Hole Location:
Holes located 180 degrees from ea. Other centered 1/2 in. From end of hub
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Straight
MRC:
A measurement of the longest dimension from the centerline of the universal joint spider to the shaft end,in distinction from width.BTBS
Length From Universal Joint Spider Centerline To Shaft End:
4.875 inches
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Winch drive shaft, truck
