부품 정보
Series 500 hose reel - no hose
TXT
묘사:
Hose Reel Assembly
MRC:
Indicates the type of connection between the prime mover and the shaft.AAYX
Drive Connection Type:
Spring wound
MRC:
The measured pressure capacity for which the item is rated.AXAW
Pressure Capacity:
1800.0 pounds per square inch
MRC:
An indication of whether or not a clutch is included.AXJL
Clutch:
Not included
MRC:
A measurement of the longest dimension of the hose the item will accommodate,in distinction from width.BMWQ
Hose Length Accommodated:
60.000 feet
MRC:
The length of a straight line which passes through the center of the accommodation for the hose,and terminates at the circumference.BMWR
Hose Diameter Accommodated:
0.500 inches
MRC:
The length of a straight line which passes through the center of the reel rim,and terminates at the outside circumference.BMWS
Reel Rim Outside Diameter:
20.000 inches
MRC:
Indicates the type of fixed reel hose piping connection.BMWW
Fixed Reel Hose Piping Connection Type:
Swing joint
MRC:
A measurement taken at right angles to the length of the mounting plate,in distinction from thickness.BMWZ
Mounting Plate Width:
8.500 inches
MRC:
The means by which the reel is actuated.BRTW
Reel Actuation Method:
Mechanical spring
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Bare reel only, does not include hose; holds of 40 to 50 ft. Of 0.500 in. Inside diameter hose; end connection 0.500 male npt fitting; media - oil, light lubricants, motor oil, automatic transmission fluids, and gear lube; reel inlet 0.500 in. Threaded male npsm; reel outlet swivel union 0.500 in. Threaded female npsm and 0.375 in. Threaded male npt; bearings are oil impregnated porous bronze; wetted parts are carbon steel and nitrile rubber; mounting plate is 8.500 in. By 8.000 in. With four mounting slots, two each on 8.500 in. Sides 6.880 in. On centers and 0.440 in. Wide; length of reel assembly is 25.750 in.
