TXT
묘사:
Silent Motion Picture Projector
MRC:
The rated power that a lamp can safely consume or provide,measured in watts.AEWS
Lamp Wattage Rating In Watts:
300.0
MRC:
The voltage for which the lamp is rated for normal operation,expressed in volts.AEWX
Lamp Voltage Rating In Volts:
120.0
MRC:
The position in which the item is designed to operate.ARNH
Operating Position:
Forward and reverse and still
MRC:
The type and amount of voltage for which the drive motor is designed.ATDC
Drive Motor Voltage Rating:
120.0 alternating current
MRC:
The projection material the item is designed to accommodate,and its type.AZYR
Projection Material And Type Accommodated:
Reel silent
MRC:
The amount of material the reel will accommodate.AZYX
Reel Capacity:
2000.0 feet
MRC:
Indicates the type of projection lamp that provides illumination.AZYY
Projection Lamp Type:
Tungsten halogen
MRC:
Designates the size of the lens opening through which the light passes.AZYZ
Lens Aperture Size:
1.2
MRC:
The means of cooling used to maintain the required operating temperature of the item.BFMF
Cooling Method:
Convection
MRC:
A measurement of the longest dimension from the center of a lens to the focal plane,in distinction from width.BKHF
Lens Focal Length:
50.0 millimeters
MRC:
A maximum measurement of the longest dimension of an item,in distinction from width.CHQP
Maximumlength:
15.000 inches
MRC:
The maximum measurement taken at right angles to the length of an item,in distinction from thickness.CHQQ
Maximumwidth:
9.500 inches
MRC:
The maximum distance measured in a straight line from the bottom to the top of an item.CHQR
Maximumheight:
15.000 inches
MRC:
The number of frames per second for which the item is rated.CTPH
Frame Rate Per Second:
1 fixed and 24 fixed
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
0j938-zczc00308zc00040 standard (includes industry or association standards, individual manufactureer standards, etc.).
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
0j938-zczc00308zc00040 manufacturers specification
