TXT
묘사:
S Electrical Insulation Sleeving
MRC:
The maximum voltage the insulating materials of the item will withstand without resulting in disruptive discharge or deterioration,expressed in volts.AAPB
Dielectric Withstanding Voltage In Volts:
200.0
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Flame resistant and mildew resistant and solvent resistant and water resistant
Large End Wall Thickness Of Main Body:
0.050 inches after unrestricted recovery
Small End Wall Thickness Of Main Body:
0.050 inches after unrestricted recovery
Distance From Intersecting Centerlines To Edge Of Small End:
0.840 inches after unrestricted recovery
Distance From Centerline Of Small End To Edge Of Large End:
0.650 inches after unrestricted recovery
Main Body Small End Inside Diameter:
0.220 inches after unrestricted recovery
Main Body Small End Inside Diameter:
0.460 inches as supplied
Main Body Large End Inside Diameter:
0.410 inches after unrestricted recovery
Main Body Large End Inside Diameter:
0.540 inches as supplied
Distance From Top Of Shoulder To Small End Of Main Body:
0.240 inches after unrestricted recovery
Angle Between Large End And Small End Centerlines In Deg:
45.0 as supplied
Angle Between Large End And Small End Centerlines In Deg:
90.0 after unrestricted recovery
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
1800 pounds per square inch
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.890 inches after unrestricted recovery
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Rubber, synthetic, rt-1312, raychem corp
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber, synthetic, rt-1312, raychem corp
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Boot-90 degrees
