TXT
묘사:
Nonmetallic Bushing
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
65.0 durometer and 75.0 durometer
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.105 inches all holes and 0.115 inches all holes
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.396 inches and 0.406 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
Between 0.583 inches and 0.593 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
Between 0.490 inches and 0.500 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
Between 0.312 inches and 0.322 inches
MRC:
A measurement from the bottom to the top of a flange,in distinction from depth.AHGD
Flange Height:
Between 0.084 inches and 0.094 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Multiple holes
MRC:
The number of holes provided.ASXK
Hole Quantity:
5 all holes
MRC:
The spacing between the holes.AYQE
Hole Spacing:
Equally spaced on 0.281 in. Circle
Body Height Above Flange:
Between 0.057 inches and 0.067 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round flanged w/holes
