부품 정보
For exterior surfaces and edges: apply one coat of primer per tt-p-1757, paint with two coats gray enamel per mil-e-15090, type iii, cl 2; holes are 4.300 between centers; centers are 0.025 in. From edge along length; centers are 0.500 in. From each side along width; alt material st1009
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 1.680 inches and 1.690 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 0.178 inches and 0.198 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 5.140 inches and 5.460 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.233 inches all holes and 0.239 inches all holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Unthreaded
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Caster, swivel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a108 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, cl 2 federal specification single treatment response
