부품 정보
Two tool turrets, each with 7 tool stations, acramatic 900tc control, feed rate 0-200 ipm, traverse rate 300 ipm; net weight 36, 000 lbs
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The center to center distance.ADQR
Center To Center Distance:
72.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Heavy duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
General
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
60.000
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Solid
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
5
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
1
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+16.0/+1600.0
MRC:
A measurement of the rated swing of the item.BTTD
Rated Swing:
32.000 inches
MRC:
A measurement of the actual swing over the bed of the item.BTTF
Actual Swing Over Bed:
32.000 inches
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
25.000 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
9999
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Geared head
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
1 morse
MRC:
Designates the size of the hollow spindle hole.BTYN
Hollow Spindle Hole Size:
4.562 inches
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Power
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Power
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Quick
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0 and 460.0 and 575.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
