부품 정보
All holes described above on flange, flange on 3 sides only; 6 hole on top 0.218 in. Dia, 1 hole 1.562 in. Dia; 2 holes on side w/o flange 0.187 in. Diameter csk 82 degrees x 0.325 in. Dia
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.218 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
7.375 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.090 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
11.469 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
5.438 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
10.500 inches
Hole Quantity Along Length:
8
Hole Quantity Along Width:
4
Distance Between Holes Along Length:
2.500 inches
Distance Between Holes Along Width:
3.000 inches
Distance Between Hole Centerline And First Hole Along Length:
1.812 inches
Distance Between Hole Centerline And First Hole Along Width:
1.812 inches
Distance From First Hole Centerline To End Along Length:
3.348 inches
Distance From First Hole Centerline To End Along Width:
1.875 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
1.750 inches
First Recess Inside Height:
1.285 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.090 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Cab shell assembly, a/s 32h-5a aircraft cargo loading truck
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/8, h32 federal specification single material response
