MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Bearing seat
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Identical
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.8430 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mk 13 missle launcher
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
0.6250 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
First end diameter 0.2810 inches for 0.0780 inches then steps to 0.3740 for 0.5000 inches with a surface finish of 32.0 microinches, then steps to 0.6250 inches for 0.3750 inches; second end diameter 0.2810 inches for 0.0780 inches then steps to 0.3750 inches for 0.8120 inches with a surface finish of 63.0 microinches, then steps to 0.6250inches diameter; both ends machined out to a depth of 0.1560 inches and 0.2180 inches diameter; unless specified all surfaces finished to 125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Stainless steel aisi 630, 17-4 ph uns s17400 federal standard single material response
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Age harden to 36-42 rockwell c per ws 13554; passivate per qq-p-35, types i, ii, or iii; penetrant inspect per mil-i-6866 type ii, method c. Cracks, seams and laps shall be cause for rejection
