부품 정보
Connection end type, first end: shaft; connection end type, second end: hub
TXT
묘사:
Nonvehicular Universal Joint
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
0.525 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
8.090 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.625 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
19
MRC:
Indicates the type of bearings furnished.ACSK
Bearing Type:
Plain
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
0.438 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.5940 inches
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End:
2.625 inches
MRC:
The outside length of the machined surface finish measured along a line parallel to the longitudinal axis of the hub.AMBB
Hub Machined Surface Finish Outside Length:
1.565 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-090
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.250 inches
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish:
Included
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore:
Included
MRC:
Indicates the type of spline(s) on the end of the shaft.BTBR
Shaft End Spline Type:
Involute
MRC:
A measurement of the longest dimension from the centerline of the universal joint spider to the shaft end,in distinction from width.BTBS
Length From Universal Joint Spider Centerline To Shaft End:
4.690 inches
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape:
Round
Shaft Facility Spline Quantity:
15
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
Err-090
