MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
Between 0.850 inches and 0.880 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.312 inches and 0.313 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.730 inches and 0.790 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.806 inches and 0.826 inches
MRC:
A measurement of a straight line extending from the center of a circle to the end.ABPZ
End Radius:
Between 0.290 inches and 0.350 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
Between 0.562 inches and 0.567 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
Between 0.208 inches and 0.214 inches
MRC:
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.AKYH
Distance From Center Of Securing Pin Hole To Rod End:
Between 0.285 inches and 0.320 inches
Distance From Pivot Pinhole Center To Rod Connection End:
Between 1.402 inches and 1.452 inches
Fork Arm Thickness:
0.220 mils and 0.280 centimeters
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
Between 0.427 inches and 0.447 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/6, t4 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate zinc
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
299-099-031, pzg1, bell helicopter co mfr ref single treatment response
