TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Oval
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.1869 inches and 0.1874 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
1.396 inches
Undercut Diameter:
Between 0.182 inches and 0.184 inches
Under Head Length:
Between 1.508 inches and 1.523 inches
Undercut Width:
Between 0.045 inches and 0.050 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
Between 0.051 inches and 0.054 inches
Distance From Centerline Of Hole To End Of Pin:
0.078 inches
Pin Head Diameter:
Between 0.276 inches and 0.286 inches
First End Outer Radius:
Between 0.094 inches and 0.104 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches outside diameter
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.058 inches and 0.068 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 482
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
