부품 번호 205-040-120-1

Shouldered Washer

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 36.3 and 49.005 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
205-040-120-1
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
000710907

부품 정보
Two diametrically opposite holes, 0.077 in. Min, 0.082 in. Maximum dia. Located on the shouldered portion, 0.180 in. Nom distance from center of hole to bearing surface of washer. Holes drilled on a 60 degrees angle

NSN
국가 주식 번호:
5310-00-071-0907 5310000710907
TXT
묘사:
Shouldered Washer
INC
INC
아이템 이름 코드:
15934
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 2.423 inches and 2.430 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 2.562 inches and 2.563 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 2.790 inches and 2.810 inches
MRC:
None.ABMG
Shoulder Height:
Between 0.260 inches and 0.280 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.080 inches and 0.090 inches
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
145000 pounds per square inch
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches all surfaces
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams6381 assn standard single material response or mil-s-5626, cond c1 military specification single material response or mil-s-6758, cond d1 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shouldered

{lang[cimilar]} Shouldered Washers

« Nuts and Washers {lang[catalog]}
지금 비교»
맑다 | 숨기다