부품 정보
Third step diameter: 1.958 in. Min and 1.960 in. Max; third step length: 9.062 in.
TXT
묘사:
Propeller Shaft With Universal J
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
Err-070
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Err-070
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Err-070
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
Err-070
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Err-070
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
3.500 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
Between 43.562 inches and 43.686 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
Err-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.AEDX
Shaft Style (non-core):
Err-090
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Err-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.AGMD
Flange Style:
Err-070
MRC:
The measured distance from the universal joint spider centerline to the flange outer face.AMBL
Length From Universal Joint Spider Centerline To Flange Outer Face:
Err-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
Err-090
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the universal joint.BTBT
Universal Joint Style:
C11
MRC:
Indicates the type and location of the end component(s).BTBX
End Component Type And Location:
Universal joint first end
MRC:
Indicates the type of connection end(s) on the universal joint.BTCC
Universal Joint Connection End Type:
Err-070
Shaft Facility Spline Quantity:
10
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Transfer transmission to pillow block