부품 정보
Flight recorder/locator system simulator test adapter set
TXT
묘사:
Aircraft Co Test Set Subassembly
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
8.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
8.750 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
E-3a aircraft
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
4ea type 509 6-volt battery power source
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Used during performance of unscheduled intermediate maintenance at the flightline to verify the dc parameter outputs while troubleshooting and fault isolating. The signal outputs from the egt and epr indicators, and fuel flow (ff) amplifier are required to exercise those channels of data recorded by the flight recorder/locator system. The output of the flight recorder/locator system is monitored by the data display monitor (ddu-4) as the input signal is varied from 0 to 5 volts dc. The signals are generated by operating engines or by providing a simulated voltage at the output of each indicator and the amplifier. The input impedance of the signal data converter between high and low is 150, 000 ohms (+o.1%)
MRC:
Indicates the date the item was entered into mil-hdbk-300.NTRD
Entry Date:
77-01-01
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
T.O.1e-3a-2-23-1 communications system usaf section x11 and t.O.35-1-251-1
