부품 정보
Laminations, edge bonded, two tab extensions on vertical centerline 0.729 in. Lg drilled through w/mounting holes 0.312 in. Dia, 1.000 in. Scallup radius between mounting holes either side of vertical centerline and alternate side w/0.500 corner radius, vertical sides scalluped w/2.900 in. Nom radius, 0.100 in. Deep
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.312 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 4.150 inches and 4.170 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 4.150 inches and 4.170 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 3.020 inches and 3.080 inches
Outside Corner Radius:
0.340 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
Between 3.482 inches and 3.502 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 3.482 inches and 3.502 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.334 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.334 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The number of laminations provided.BRDX
Lamination Quantity:
16
MRC:
The distance between the opposite flat surfaces of the individual laminations.BRDY
Lamination Thickness:
0.003 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Nonseparable
MRC:
The structural characteristic of the item.CQCF
Construction:
Laminated
