MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 1.120 inches and 1.180 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 2.220 inches and 2.280 inches
Second Leg Width:
Between 0.970 inches and 1.030 inches
Second Leg End Width:
Between 0.470 inches and 0.590 inches
First Leg Hole Diameter:
Between 0.249 inches and 0.251 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.470 inches and 0.530 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.720 inches and 0.840 inches
Second Leg Distance Between First And Second Hole Centers Along Length:
Between 0.720 inches and 0.840 inches
Second Leg Distance Between Second And Third Hole Centers Along Length:
Between 0.910 inches and 0.970 inches
First Leg Width:
Between 0.970 inches and 1.030 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.470 inches and 0.530 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.484 inches and 0.564 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius w/ tongue
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Three holes
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/3, t4 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
