TXT
묘사:
Double Angle Bracket
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.820 inches and 0.880 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 0.990 inches and 1.050 inches
Second Leg Width:
Between 1.720 inches and 1.780 inches
First Leg Hole Diameter:
Between 0.300 inches and 0.320 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.040 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.040 inches
Center Section Height:
Between 1.280 inches and 1.340 inches
Center Section Width:
Between 1.720 inches and 1.780 inches
Center Section Thickness:
0.040 inches
First Leg Width:
Between 1.720 inches and 1.780 inches
First Leg Distance Between Hole Centers Along Width:
Between 0.730 inches and 0.770 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.490 inches and 0.510 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.350 inches and 0.410 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/5 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Bell helicopter, bps fw4001 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Double angle
