TXT
묘사:
Steering Tie Rod End
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.516 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
Between 2.000 inches and 2.005 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
1.125 inches
MRC:
The length of a straight line which passes through the center of a pivot hole,and terminates at the circumference.ANMD
Pivot Hole Diameter:
Between 0.7495 inches and 0.7505 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Yoke
MRC:
The distance from the center of the pivot hole to the rod connecting end.CFCG
Distance From Pivot Hole Center To Rod Connecting End:
6.000 inches
MRC:
The portion/s/ of the rod connection end on which the thread is located.CFCL
Rod Connecting End Thread Location:
Internal
MRC:
Designates the thread diameter and number of threads per measurement scale of the rod connecting end.CFCM
Rod Connecting End Thread Size:
1-3/8-12
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a diameter of the rod connecting end.CFCN
Rod Connecting End Thread Series Designator:
Unf
MRC:
The direction of the rod connecting end thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.CFCP
Rod Connecting End Thread Direction:
Right-hand
MRC:
A measurement of the extent of complete (full) threads along a line parallel to the longitudinal axis of the rod connecting end.CFCQ
Rod Connecting End Thread Length:
3.750 inches
MRC:
Indicates the type of locking clamp provided.CNJF
Locking Clamp Type:
Integral
