부품 정보
Thermofit molded parts - boot, straight with lip
TXT
묘사:
S Electrical Insulation Sleeving
MRC:
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.AARG
Reliability Indicator:
Not established
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Mildew resistant and water resistant and petroleum resistant and hydraulic fluid and jet fuel resistant
Main Body Wall Thickness:
0.045 inches after unrestricted recovery
Main Bodylength:
6.280 inches after unrestricted recovery
Main Body Small End Inside Diameter:
0.380 inches after unrestricted recovery
Main Body Large End Inside Diameter:
0.900 inches after unrestricted recovery
Distance From Bottom Of Shoulder To Large End Of Main Body:
0.620 inches after unrestricted recovery
Distance From Top Of Shoulder To Small End Of Main Body:
5.150 inches after unrestricted recovery
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Jet1-shore ba; cable assembly e3 fadec
MRC:
An indication of the markings on the item.BDBN
Markings:
Any acceptable
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
1200 pounds per square inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Has lip 0.120 in. Wide x 0.04 in. High at mouth of wide end
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Flexible
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Black
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polyolefin
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyolefin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Boot-straight
