TXT
묘사:
Electrical Contact Brush
MRC:
Standard location by position number for shunt/s/.AABU
Shunt Position Designator:
1
MRC:
The speed of the commutator or slip-ring for which the item is designed.AACQ
Peripheral Speed:
4000 feet per minute
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Rectangular commutator
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
0.145 inches
MRC:
A measurement of the longest dimension of a head,in distinction from width.AASV
Head Length:
0.125 inches
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
0.438 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.187 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.187 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
0.594 inches
Spring Free Length:
1.563 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of an item,and terminates at the outside circumference.AGWM
Largest Outside Diameter:
0.168 inches
MRC:
A measurement of the longest dimension of the brush shunt,in distinction from width.AHXP
Brush Shunt Length:
1.563 inches single shunt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the top.BTHR
Top Style:
Cylindrical head
MRC:
The sytle designation indicating the configuration that most nearly corresponds to the appearance of the contact face.CQGT
Contact Face Style:
Concave
MRC:
An indication of whether or not a covering material is provided and the number of shunts included.CRBG
Shunt Insulation Provision And Quantity:
1 uninsulated
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Matt and mdcl
MRC:
Indicates the type and number of pressure springs provided.CRWQ
Pressure Spring Type And Quantity:
1 cylindrical
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Electrographitic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
General carbon co, gr abht mfr ref single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
One piece
