측정 단위:
* special requirements. EA
TXT
묘사:
Valve Spring Retainer Lock
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Not casehardened
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.375 inches
MRC:
An indication of whether a portion/s/ of the item is threaded or unthreaded.AFEW
Thread Provision:
Unthreaded
Largest Inside Diameter:
Between 0.308 inches and 0.312 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of an item,and terminates at the outside circumference.AGWM
Largest Outside Diameter:
Between 0.464 inches and 0.468 inches
MRC:
The smallest length of a straight line which passes through the center of an item,and terminates on the inside circumference.BKKZ
Minimum Inside Diameter:
0.250 inches
Largest Outside Width:
Between 0.464 inches and 0.468 inches
First Ridge Radius:
Between 0.027 inches and 0.029 inches
Second Ridge Radius:
Between 0.027 inches and 0.029 inches
Distance Between First And Second Ridge Centers:
Between 0.155 inches and 0.157 inches
Distance From Bottom To First Ridge Center:
0.191 inches
First Ridge Width:
Between 0.054 inches and 0.058 inches
Second Ridge Width:
Between 0.054 inches and 0.058 inches
Outside Included Angle In Deg:
14.0
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight bore w/two ridges-lower outside radius
